SX1302 LoRa Gateway module
LoRa Module

SX1302 LoRa Gateway module

  • Vendor:LPWAN SPACE
  • Category: Best Sellers, IoT Gateways, Latest Products, LoRa Modules
Availability: In Stock
$150.00
Wishlist Compare

This LoRa gateway module with an industrial standard mini PCI expresses form factor is based on the SX1302 chipset. This mPCIe module can be used in any embedded platform offering a free mPCIe slot with SPI connectivity and capable of providing enough power for the module, enabling low-power wide-area communication capabilities to your new gateway design or existing industrial routers/computer.

Complete and cost-efficient LoRa gateway solution offering up to eight(8) programmable Lora parallel demodulation channels. Allowing it to receive up to eight LoRa® modulated packets simultaneously. It targets Internet-of-Things (IoT) applications, covering up to 500 nodes per square kilometer in an environment with moderate interference.   

Features

  • Compliance with LoRaWAN 1.0.2
  • Multichannel: Eight (8) programmable Lora parallel demodulation channels.
  • mPCIe form factor based on SPI host interface
  • Compact mini PCI express form factor TYP. 50.95*30.0*10.5mm (W*L*H)
  • The voltage of Mini PCI-e is 3.3V, compatible with 3G/LTE mPCIe card
  • TX Power up to 27dBm, Rx sensitivity down to -139dBm@SF12,BW 125kHz.
 

Specifications

Parameters Description
Modulation type ISM Band LoRa®
LoRa chipset SX1302
Multi-channel Eight (8) uplink, one (1) downlink
Package Mini PCI express 
Host interface SPI
Frequency 863~870MHZ, 902~928MHZ(Opt.), CN470MHz
Receiving sensitivity -139dBm
Tx power +27dBm
Supply voltage +3.3V
Power consumption Tx (Max)<415mA,Rx <40mA, standby 7.5mA
Operating temperature -40~+85℃ (industrial grade)
Operating humidity 10%~90%, no-condensing
Dimensions TYP. 50.95*30*10.5mm (W*L*H)
ESD (Human Body Model)   JEDEC JS-001 Standard ±1kV, Class 2 

SX1302 pin out

No. Mini PCIEx Pin Rev 2.0 Type Description
1 NC N/A No Connection.Reserved for SX1261_BUSY
2 +3.3V Power input 3.3V DC supply.
3 NC N/A No connection.Reserved for SX1261_DIO1
4 GND GND Ground
5 NC N/A No connection.Reserved for SX1261_DIO2
6 1.5V I/O Connect to SX1302’s GPIO[6]
7 NC N/A No connection.Reserved for SX1261_NSS
8 NC N/A No connection
9 GND GND Ground
10 NC N/A No connection
11 NC N/A No connection.Reserved for SX1261_NRESET
12 NC N/A No connection
13 MCU_NRESET DI No connection.Reserved for future applications
14 NC N/A No connection
15 GND GND Ground
16 NC N/A No connection.Reserved for POWER_EN
17 NC N/A No connection
18 GND GND Ground
19 1PPS DO GPS time pulse input, Leave open if 
20 NC N/A No connection
21 GND GND Ground
22 SX1302-Reset DI Active high>=100ns for SX1302 Reset input
23 NC N/A No connection
24 +3.3V PI 3.3V DC supply
25 NC N/A No connection
26 GND GND Ground
27 GND GND Ground
28 NC N/A No connection
29 GND GND Ground
30 NC N/A No connection.Reserved for SMB_CLK 
31 NC        N/A No connection
32 NC N/A No connection.Reserved for SMB_DATA
33 NC N/A No connection
34 GND GND Ground
35 GND GND Ground
36 NC N/A No connection.Reserved for USB_DM
37 GND GND Ground
38 NC N/A No connection.Reserved for USB_DP
39 +3.3V PI 3.3DC supply
40 GND GND Ground
41 +3.3V PI 3.3V DC supply
42 NC N/A No connection
43 GND GND Ground
44 NC N/A No connection
45 HOST_SCK I/O Host SPI CLK
46 NC N/A No Connection
47 HOST_MISO I/O Host SPI MISO
48 NC N/A Not connected
49 HOST_MOSI I/O Host SPI MISI
50 GND N/A Ground
51 HOST_CSN I/O Host SPI CS
52 +3.3V PI 3.3V DC supply